#Vinyl cutter how to
#Vinyl cutter professional

You can read more about GRAPHTEC on their website here: The following explanations of setting up the vinyl cutter will be shown on a GRAPHTEC cutting plotter CE 7000-60.

#Vinyl cutter how to

In this part you’ll learn how to start and set up the vinyl cutter, place and secure the material. Do not use a water or foam based fire extinguisher as those do not work on electrical devices. In addition to this, the room should be equipped with a dry powder or a CO 2 fire extinguisher in case the device catches fire. Be wary of any small objects, like screws, that could fall down cracks in the machine. The room should be free of dust, moisture and direct sunlight. You should be using cut resistant gloves to protect your hands.Īs it is a computer controlled machine, you should never place any magnetic device in the vicinity of the vinyl cutter. If approaching the blade is needed, high precaution is required. Never place your hands close to the machine, other than the control panel, while it is operating.

#Vinyl cutter professional

Monitor the wound afterward and seek professional medical help in case of infection. In case of cuts, make sure to disinfect the wound before placing any bandage. It’s for that reason that you should have a first aid kit ready close by with everything needed to treat a cut. While not being the most dangerous machine you’ll find in a maker space, the vinyl cutter is still equipped with a sharp blade. In this part you’ll learn how to engage with a vinyl cutter in a safe manner by learning about the sharp blade, which safety precautions and material you should prepare.īefore working with a vinyl cutter, you need to be aware of the danger, how to prevent them and be ready in case any accident occurs. There’s a large variety of things that can be done with a vinyl cutter, including, but not limited to, storefront signs, stickers, labels, shirt design, PCB patterns, stencil for a variety of uses and paper craft. Now that you have a basic understanding of how the vinyl cutter works, let’s talk about what you can actually use a vinyl cutter for. Picture by Lévi PONSARDĪll those elements together allow the blade to cut any desired path. The other axis of motion is a roll under the material itself it serves both to secure the material and to move it back and forth. To move around the material, the blade is put on a movable axis to go left to right. I will be referring to this “tool” in general during the whole course. For example, a pen can also be used to draw instead of cutting. This tool is most often a sharp blade but can be replaced with other kinds.

The tool is pushed down onto the material with a set force.